Wallpaper is an interior decor for your spaces that provides a beautiful look to your space’s walls. However, bubbles in wallpaper are a common issue that often occurs when sticking it. These bubbles can spoil the smooth finish and damage the overall look of the wallpaper. The good news is you can fix it, thanks to perfect techniques. To achieve a perfect finish, follow these tips:
Understanding the Common Problem of Bubbles Appearing in Wallpaper
Wallpaper is often used to provide a decorative touch or make a space more visually appealing in both homes and businesses. Regretfully, bubbles may occasionally occur beneath the wallpaper after it has been hung, giving it an ugly look.
This common problem occurs when adhesive is applied or air bubbles become trapped during installation. Thankfully, resolving this problem doesn’t have to be challenging. You may restore your wallpaper to its original splendour with the correct technique.
Technique 1: Check Bubbles
Assess your wallpaper closely for any air pockets or bubbles. To make them easier to see, use natural light or shine a lamp across the surface. To ensure you don’t miss any bubbles while repairing, mark their locations with a pencil or a small piece of tape.
Technique 2: Remove Small Bubbles
Press outward towards the bubble’s edges, starting from the middle. Apply firmly but gently to release the trapped air.
Technique 3: Inject and Expel Air
If smoothing doesn’t cause the bubble to flatten, make a small cut in the middle of it with a sewing needle or pin. The trapped air can now escape thanks to this hole.
Technique 4: Area Re-Smoothing
Once the air has been released, use your hand or a squeegee to smooth the wallpaper once more. To expel any last bits of air, start at the bubble’s perimeter and work your way toward the hole. After the area is polished, the tiny pinhole will be almost unnoticeable.
Technique 5: Use Heat to Release Stubborn Bubbles
Apply a little heat to the area with a hairdryer set to low for larger or more tenacious bubbles. It will be simpler to flatten the bubble because the heat will soften the adhesive. Avoid overheating the wallpaper, as this may cause harm to the material.
Technique 6: Eliminate and reapply as Needed
A bubble that is too big or won’t flatten can require you to remove the affected area and apply it again. Press the wallpaper back into place after gently removing it from the wall and smoothing out any bubbles. When reapplying, proceed cautiously to prevent the formation of new bubbles.
Technique 7: Avoid Bubbles While Installing
Take these steps to prevent bubbles in the first place:
- Clean the Wall: Before you apply the wallpaper, make sure the surface is dry, clean, and clear of any dust or oil.
- Slowly Work: Gently remove the backing paper while applying the wallpaper to the wall. Evenly smooth it down with a squeegee.
- Prevent Stretching: To avoid stretching the wallpaper, which can cause bubbles, handle it carefully.
Peel and stick wallpaper bubbles can be annoying, but they can be easily fixed with the correct equipment, such as an activator, and the right methods. To avoid bubbles in the first place, take your time installing it and focus on the instructions. Your walls will appear gorgeous and bubble-free with a little perseverance and hard work!
