Maintenance
- Furniture

Here Are Four Indications That Your Evaporative Cooler Requires Some Maintenance

722 Views

An evaporative cooler, commonly called a “swamp cooler,” is an alternative to the conventional air-conditioning system that many homes and businesses rely on. As opposed to making use of refrigerant, the cooling process in this apparatus is accomplished through the evaporation of water.

Evaporative coolers not only use less energy than other types of coolers but also add moisture to the air. In this piece, we will take a look at some of the issues that are associated with the maintenance and repair of your cooler.

1. The Apparatus Does Not Turn On.

You need to begin by checking the fuse that is associated with the evaporative cooler. The blown fuse is the reason for the unit’s failure to start the vast majority of the time. If the fuse has blown, you will probably need to give Wagner a call so that they can replace it.

It is also possible for the breaker to trip, which would result in the system being unable to start. Investigating the wiring for any indications of wear and tear could remedy the issue. It is strongly recommended that you have one of Wagner’s trained professionals to carry out this task on your behalf.

2. The Device Has A Peculiar Odor That Is Emanating From It.

The source of the unusual stench emanating from the unit could be mildew or water that has been sitting there. It should come as no surprise that you should not try to avoid or put off dealing with this issue in any way.

3. The Circulation Of Air Is Not As It Should Be.

A blockage in the exhaust ducts is the primary cause of improper airflow in a building. To get this issue resolved, a professional should be contacted. In the event that the evaporative cooler does not come equipped with an exhaust, you need to check to see that there is an appropriate opening for the unit.

The majority of manufacturers of evaporative coolers stipulate that the unit must have an opening of around two square feet for every 1,000 cubic feet per minute (CFM) of airflow that it supplies.

4. There Is Water Escaping From The Evaporative Cooler.

Another indication that the appliance needs maintenance is when water drips from the cooler. There could be a variety of causes for the water to be dripping. The majority of the time, it is because the cooling unit was not stored properly throughout the winter. Be sure to store the unit in the appropriate manner. Before you put the evaporator cooler away for the winter, you need to empty the tank, take out the pads, and clean the unit. In addition to this, the device must be stored in an area that is adequately covered.

If your evaporative cooler is exhibiting any of the symptoms described above, you should think about contacting a qualified and licensed expert to do an inspection on your device.

Additionally, it is advised that you have your swamp cooler inspected on a regular basis. The expert will perform a comprehensive check during the routine inspection to make certain that everything is in satisfactory shape. A high level of efficiency in the cooling system requires regular maintenance. Additionally, the risk of expensive repairs will decrease as a result of this action.

Leave a Reply

Your email address will not be published. Required fields are marked *